Smbclient cant transer large files

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Smbclient cant transer large files

Samba - General mailing list

Hello

I have a problem transferring files >64KB to a Windows share, it worked fine until a few weeks ago (see bottom for information).
The issue seems identical to https://lists.samba.org/archive/samba/2016-November/204558.html, and I added a Wireshark-Dump which begins directly after
NTLMSSP_AUTH authentication (don't want to add login information).

The error is always "Write AndX Response fails with  STATUS_INVALID_PARAMETER"

The same drive can be mounted and accessed easily with cifs:
//vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs (rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<snip>,domain=<snip>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,file_mode=0755,dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_interval=60,actimeo=1,user=<snip>)

The problem seems to have appeared with 2:4.2.14+dfsg-0+deb8u7:
http://metadata.ftp-master.debian.org/changelogs/main/s/samba/samba_4.2.14+dfsg-0+deb8u7_changelog

A very old smbclient (Ubuntu 12.04) was successfully tested, so I believe this was not a change on the NFS Server

Kind regards

Norbert Lange



#####################################################################################

This message and any attachments are solely for the use of the intended recipients. They may contain privileged and/or confidential information or other information protected from disclosure. If you are not an intended recipient, you are hereby notified that you received this email in error and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system.

Thank You.

#####################################################################################

--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Smbclient cant transer large files

Samba - General mailing list

Well, apparently there WAS a change on the Windows Server, which only affected new samba versions
I was able to fix my issue by using this patch: https://bugzilla.samba.org/show_bug.cgi?id=12776

Can this be officially fixed please?

 >-----Original Message-----
 >From: Lange Norbert
 >Sent: Dienstag, 08. August 2017 10:04
 >To: [hidden email]
 >Subject: Smbclient cant transer large files
 >
 >
 >Hello
 >
 >I have a problem transferring files >64KB to a Windows share, it worked fine
 >until a few weeks ago (see bottom for information).
 >The issue seems identical to https://lists.samba.org/archive/samba/2016-
 >November/204558.html, and I added a Wireshark-Dump which begins directly
 >after
 >NTLMSSP_AUTH authentication (don't want to add login information).
 >
 >The error is always "Write AndX Response fails with
 >STATUS_INVALID_PARAMETER"
 >
 >The same drive can be mounted and accessed easily with cifs:
 >//vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs
 >(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<snip>,domain=<sni
 >p>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,file_mode=0755,
 >dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_interval=60,a
 >ctimeo=1,user=<snip>)
 >
 >The problem seems to have appeared with 2:4.2.14+dfsg-0+deb8u7:
 >http://metadata.ftp-
 >master.debian.org/changelogs/main/s/samba/samba_4.2.14+dfsg-
 >0+deb8u7_changelog
 >
 >A very old smbclient (Ubuntu 12.04) was successfully tested, so I believe this
 >was not a change on the NFS Server
 >
 >Kind regards
 >
 >Norbert Lange



#####################################################################################

This message and any attachments are solely for the use of the intended recipients. They may contain privileged and/or confidential information or other information protected from disclosure. If you are not an intended recipient, you are hereby notified that you received this email in error and that any review, dissemination, distribution or copying of this email and any attachment is strictly prohibited. If you have received this email in error, please contact the sender and delete the message and any attachment from your system.

Thank You.

#####################################################################################


--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Smbclient cant transer large files

Samba - General mailing list
Hi,

>>The same drive can be mounted and accessed easily with cifs://vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs  
>>(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<snip>,domain=<snip>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,\
>> file_mode=0755,dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_interval=60,actimeo=1,user=<snip>)

What i noticed here also, and if someone can explain this for me why this is.
rsize=61440
wsize=65536

Normaly i see rsize and wsize 65536
By default block size = 1024 but above shows a difference of exact 4096
Is this related? Should block size not be 4096?

From the above cifs mount line, i see a vers=1.0
1.0 - The classic CIFS/SMBv1 protocol, and smbv1 is getting disabled everywhere.
This is due to you samba 4.2 also.

So what happens if use try smbclient like this.
smbclient -m SMB2 or  smbclient -m SMB3

If you want, or if your able to, i really suggest upgrade you Jessie server to Stretch.
And run al least samba 4.5.8, but preffered even higher.

If you dont want to move to stretch yet, you can use my packages, found here : http://apt.van-belle.nl 
For jessie i have : 4.5.8 backported from stretch, 4.5.12 created from samba.org source, 4.6.6 created from samba.org source.
For stretch : 4.6.5 and 4.6.6 are available.
The apt site explains howto use them.

Now very last Norbert, you have the same problem with NFS? I dont understand this part.
>  >A very old smbclient (Ubuntu 12.04) was successfully tested, so I believe this was not a change on the NFS Server
Can you explain more here, if you problem cifs of nfs or both?


Greetz,

Louis


> -----Oorspronkelijk bericht-----
> Van: samba [mailto:[hidden email]] Namens
> Lange Norbert via samba
> Verzonden: dinsdag 8 augustus 2017 10:55
> Aan: [hidden email]
> Onderwerp: Re: [Samba] Smbclient cant transer large files
>
>
> Well, apparently there WAS a change on the Windows Server,
> which only affected new samba versions I was able to fix my
> issue by using this patch:
> https://bugzilla.samba.org/show_bug.cgi?id=12776
>
> Can this be officially fixed please?
>
>  >-----Original Message-----
>  >From: Lange Norbert
>  >Sent: Dienstag, 08. August 2017 10:04
>  >To: [hidden email]
>  >Subject: Smbclient cant transer large files  >  >  >Hello  
> >  >I have a problem transferring files >64KB to a Windows
> share, it worked fine  >until a few weeks ago (see bottom for
> information).
>  >The issue seems identical to
> https://lists.samba.org/archive/samba/2016-
>  >November/204558.html, and I added a Wireshark-Dump which
> begins directly  >after  >NTLMSSP_AUTH authentication (don't
> want to add login information).
>  >
>  >The error is always "Write AndX Response fails with  
> >STATUS_INVALID_PARAMETER"
>  >
>  >The same drive can be mounted and accessed easily with cifs:
>  >//vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs  
> >(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<sni
> p>,domain=<sni
>  
> >p>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,fi
> le_mode=0755,
>  
> >dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_in
> terval=60,a
>  >ctimeo=1,user=<snip>)
>  >
>  >The problem seems to have appeared with 2:4.2.14+dfsg-0+deb8u7:
>  >http://metadata.ftp-
>  >master.debian.org/changelogs/main/s/samba/samba_4.2.14+dfsg-
>  >0+deb8u7_changelog
>  >
>  >A very old smbclient (Ubuntu 12.04) was successfully
> tested, so I believe this  >was not a change on the NFS
> Server  >  >Kind regards  >  >Norbert Lange
>
>
>
> ##############################################################
> #######################
>
> This message and any attachments are solely for the use of
> the intended recipients. They may contain privileged and/or
> confidential information or other information protected from
> disclosure. If you are not an intended recipient, you are
> hereby notified that you received this email in error and
> that any review, dissemination, distribution or copying of
> this email and any attachment is strictly prohibited. If you
> have received this email in error, please contact the sender
> and delete the message and any attachment from your system.
>
> Thank You.
>
> ##############################################################
> #######################
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
>


--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Smbclient cant transer large files

Samba - General mailing list
Hai,

Now, i myself dont use desktops on linux but..

I suspect you need to use gnome-mount with --write-settings  to save the smb2 change.
https://linux.die.net/man/1/gnome-mount 


Greetz,

Louis

> -----Oorspronkelijk bericht-----
> Van: Lange Norbert [mailto:[hidden email]]
> Verzonden: dinsdag 8 augustus 2017 12:00
> Aan: L.P.H. van Belle
> Onderwerp: RE: [Samba] Smbclient cant transer large files
>
> Hello,
>
> the mount was done from within GNOME, I don`t know where
> those parameters come from.
>
> Some corrections are necessary:
> The problematic server is a Stretch server, and my desktop is
> Buster/Testing, apart from that I have a own repo with
> backports and various fixes (like now samba with the referred patch).
>
> ... and replace the occurrence of "NFS Server" with "Windows
> Server", sorry for the confusion
>
> I added the output of the various SMB Modes, only SMB2 works
> (seems like a better fix than having to maintain a patched samba)
>
> Thanks,
> Norbert
>
>  >-----Original Message-----
>  >From: samba [mailto:[hidden email]] On
> Behalf Of L.P.H. van  >Belle via samba
>  >Sent: Dienstag, 08. August 2017 11:28
>  >To: [hidden email]
>  >Subject: Re: [Samba] Smbclient cant transer large files  >  
> >EMAIL from a NON-ANDRITZ SOURCE: as a security measure,
> please exercise  >caution with email content and any links or
> attachments.
>  >
>  >
>  >Hi,
>  >
>  >>>The same drive can be mounted and accessed easily with  
> >cifs://vienas01.andritz.com/HIPASE on /media/HIPASE_Q type
> cifs  
> >>>(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<s
> nip>,domain=<
>  >snip>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,\
>  >>>
>  
> >file_mode=0755,dir_mode=0755,nounix,mapposix,rsize=61440,wsiz
> e=65536,ec
>  >ho_interval=60,actimeo=1,user=<snip>)
>  >
>  >What i noticed here also, and if someone can explain this
> for me why this is.
>  >rsize=61440
>  >wsize=65536
>  >
>  >Normaly i see rsize and wsize 65536
>  >By default block size = 1024 but above shows a difference
> of exact 4096  >Is this related? Should block size not be 4096?
>  >
>  >From the above cifs mount line, i see a vers=1.0  >1.0 -
> The classic CIFS/SMBv1 protocol, and smbv1 is getting
> disabled  >everywhere.
>  >This is due to you samba 4.2 also.
>  >
>  >So what happens if use try smbclient like this.
>  >smbclient -m SMB2 or  smbclient -m SMB3  >  >If you want,
> or if your able to, i really suggest upgrade you Jessie
> server to  >Stretch.
>  >And run al least samba 4.5.8, but preffered even higher.
>  >
>  >If you dont want to move to stretch yet, you can use my
> packages, found here :
>  >http://apt.van-belle.nl
>  >For jessie i have : 4.5.8 backported from stretch, 4.5.12
> created from  >samba.org source, 4.6.6 created from samba.org source.
>  >For stretch : 4.6.5 and 4.6.6 are available.
>  >The apt site explains howto use them.
>  >
>  >Now very last Norbert, you have the same problem with NFS?
> I dont understand  >this part.
>  >>  >A very old smbclient (Ubuntu 12.04) was successfully
> tested, so I believe this  >was not a change on the NFS
> Server  >Can you explain more here, if you problem cifs of
> nfs or both?
>  >
>  >
>  >Greetz,
>  >
>  >Louis
>  >
>  >
>  >> -----Oorspronkelijk bericht-----
>  >> Van: samba [mailto:[hidden email]] Namens  
> >> Lange Norbert via samba  >> Verzonden: dinsdag 8 augustus
> 2017 10:55  >> Aan: [hidden email]  >> Onderwerp: Re:
> [Samba] Smbclient cant transer large files  >>  >>  >> Well,
> apparently there WAS a change on the Windows Server,  >>
> which only affected new samba versions I was able to fix my  
> >> issue by using this patch:
>  >> https://bugzilla.samba.org/show_bug.cgi?id=12776
>  >>
>  >> Can this be officially fixed please?
>  >>
>  >>  >-----Original Message-----
>  >>  >From: Lange Norbert
>  >>  >Sent: Dienstag, 08. August 2017 10:04  >>  >To:
> [hidden email]  >>  >Subject: Smbclient cant transer
> large files  >  >  >Hello  >> >  >I have a problem
> transferring files >64KB to a Windows  >> share, it worked
> fine  >until a few weeks ago (see bottom for  >> information).
>  >>  >The issue seems identical to
>  >> https://lists.samba.org/archive/samba/2016-
>  >>  >November/204558.html, and I added a Wireshark-Dump
> which  >> begins directly  >after  >NTLMSSP_AUTH
> authentication (don't  >> want to add login information).
>  >>  >
>  >>  >The error is always "Write AndX Response fails with  >>
> >STATUS_INVALID_PARAMETER"
>  >>  >
>  >>  >The same drive can be mounted and accessed easily with cifs:
>  >>  >//vienas01.andritz.com/HIPASE on /media/HIPASE_Q type
> cifs  >>
> >(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<sni
>  >> p>,domain=<sni
>  >>
>  >> >p>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,fi
>  >> le_mode=0755,
>  >>
>  >> >dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_in
>  >> terval=60,a
>  >>  >ctimeo=1,user=<snip>)
>  >>  >
>  >>  >The problem seems to have appeared with 2:4.2.14+dfsg-0+deb8u7:
>  >>  >http://metadata.ftp-
>  >>  >master.debian.org/changelogs/main/s/samba/samba_4.2.14+dfsg-
>  >>  >0+deb8u7_changelog
>  >>  >
>  >>  >A very old smbclient (Ubuntu 12.04) was successfully  
> >> tested, so I believe this  >was not a change on the NFS  
> >> Server  >  >Kind regards  >  >Norbert Lange  >>  >>  >>  
> >> ##############################################################
>  >> #######################
>  >>
>  >> This message and any attachments are solely for the use
> of  >> the intended recipients. They may contain privileged
> and/or  >> confidential information or other information
> protected from  >> disclosure. If you are not an intended
> recipient, you are  >> hereby notified that you received this
> email in error and  >> that any review, dissemination,
> distribution or copying of  >> this email and any attachment
> is strictly prohibited. If you  >> have received this email
> in error, please contact the sender  >> and delete the
> message and any attachment from your system.
>  >>
>  >> Thank You.
>  >>
>  >> ##############################################################
>  >> #######################
>  >>
>  >>
>  >> --
>  >> To unsubscribe from this list go to the following URL and
> read the  >> instructions:  
> https://lists.samba.org/mailman/options/samba
>  >>
>  >
>  >
>  >--
>  >To unsubscribe from this list go to the following URL and read the
>  >instructions:  https://lists.samba.org/mailman/options/samba
>


--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Smbclient cant transer large files

Samba - General mailing list
In reply to this post by Samba - General mailing list
(forwarding this, din not reply-all)

-----Original Message-----
From: Lange Norbert
Sent: Dienstag, 08. August 2017 12:00
To: 'L.P.H. van Belle'
Subject: RE: [Samba] Smbclient cant transer large files

Hello,

the mount was done from within GNOME, I don`t know where those parameters come from.

Some corrections are necessary:
The problematic server is a Stretch server, and my desktop is Buster/Testing,
apart from that I have a own repo with backports and various fixes (like now samba with the referred patch).

... and replace the occurrence of "NFS Server" with "Windows Server", sorry for the confusion

I added the output of the various SMB Modes, only SMB2 works (seems like a better fix than having to maintain a patched samba)

Thanks,
Norbert

 >-----Original Message-----
 >From: samba [mailto:[hidden email]] On Behalf Of L.P.H. van
 >Belle via samba
 >Sent: Dienstag, 08. August 2017 11:28
 >To: [hidden email]
 >Subject: Re: [Samba] Smbclient cant transer large files
 >
 >EMAIL from a NON-ANDRITZ SOURCE: as a security measure, please exercise
 >caution with email content and any links or attachments.
 >
 >
 >Hi,
 >
 >>>The same drive can be mounted and accessed easily with
 >cifs://vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs
 >>>(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<snip>,domain=<
 >snip>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,\
 >>>
 >file_mode=0755,dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,ec
 >ho_interval=60,actimeo=1,user=<snip>)
 >
 >What i noticed here also, and if someone can explain this for me why this is.
 >rsize=61440
 >wsize=65536
 >
 >Normaly i see rsize and wsize 65536
 >By default block size = 1024 but above shows a difference of exact 4096
 >Is this related? Should block size not be 4096?
 >
 >From the above cifs mount line, i see a vers=1.0
 >1.0 - The classic CIFS/SMBv1 protocol, and smbv1 is getting disabled
 >everywhere.
 >This is due to you samba 4.2 also.
 >
 >So what happens if use try smbclient like this.
 >smbclient -m SMB2 or  smbclient -m SMB3
 >
 >If you want, or if your able to, i really suggest upgrade you Jessie server to
 >Stretch.
 >And run al least samba 4.5.8, but preffered even higher.
 >
 >If you dont want to move to stretch yet, you can use my packages, found here :
 >http://apt.van-belle.nl
 >For jessie i have : 4.5.8 backported from stretch, 4.5.12 created from
 >samba.org source, 4.6.6 created from samba.org source.
 >For stretch : 4.6.5 and 4.6.6 are available.
 >The apt site explains howto use them.
 >
 >Now very last Norbert, you have the same problem with NFS? I dont understand
 >this part.
 >>  >A very old smbclient (Ubuntu 12.04) was successfully tested, so I believe this
 >was not a change on the NFS Server
 >Can you explain more here, if you problem cifs of nfs or both?
 >
 >
 >Greetz,
 >
 >Louis
 >
 >
 >> -----Oorspronkelijk bericht-----
 >> Van: samba [mailto:[hidden email]] Namens
 >> Lange Norbert via samba
 >> Verzonden: dinsdag 8 augustus 2017 10:55
 >> Aan: [hidden email]
 >> Onderwerp: Re: [Samba] Smbclient cant transer large files
 >>
 >>
 >> Well, apparently there WAS a change on the Windows Server,
 >> which only affected new samba versions I was able to fix my
 >> issue by using this patch:
 >> https://bugzilla.samba.org/show_bug.cgi?id=12776
 >>
 >> Can this be officially fixed please?
 >>
 >>  >-----Original Message-----
 >>  >From: Lange Norbert
 >>  >Sent: Dienstag, 08. August 2017 10:04
 >>  >To: [hidden email]
 >>  >Subject: Smbclient cant transer large files  >  >  >Hello
 >> >  >I have a problem transferring files >64KB to a Windows
 >> share, it worked fine  >until a few weeks ago (see bottom for
 >> information).
 >>  >The issue seems identical to
 >> https://lists.samba.org/archive/samba/2016-
 >>  >November/204558.html, and I added a Wireshark-Dump which
 >> begins directly  >after  >NTLMSSP_AUTH authentication (don't
 >> want to add login information).
 >>  >
 >>  >The error is always "Write AndX Response fails with
 >> >STATUS_INVALID_PARAMETER"
 >>  >
 >>  >The same drive can be mounted and accessed easily with cifs:
 >>  >//vienas01.andritz.com/HIPASE on /media/HIPASE_Q type cifs
 >> >(rw,nosuid,nodev,relatime,vers=1.0,cache=strict,username=<sni
 >> p>,domain=<sni
 >>
 >> >p>,uid=1000,forceuid,gid=1000,forcegid,addr=172.24.180.161,fi
 >> le_mode=0755,
 >>
 >> >dir_mode=0755,nounix,mapposix,rsize=61440,wsize=65536,echo_in
 >> terval=60,a
 >>  >ctimeo=1,user=<snip>)
 >>  >
 >>  >The problem seems to have appeared with 2:4.2.14+dfsg-0+deb8u7:
 >>  >http://metadata.ftp-
 >>  >master.debian.org/changelogs/main/s/samba/samba_4.2.14+dfsg-
 >>  >0+deb8u7_changelog
 >>  >
 >>  >A very old smbclient (Ubuntu 12.04) was successfully
 >> tested, so I believe this  >was not a change on the NFS
 >> Server  >  >Kind regards  >  >Norbert Lange
 >>
 >>
 >>
 >> ##############################################################
 >> #######################
 >>
 >> This message and any attachments are solely for the use of
 >> the intended recipients. They may contain privileged and/or
 >> confidential information or other information protected from
 >> disclosure. If you are not an intended recipient, you are
 >> hereby notified that you received this email in error and
 >> that any review, dissemination, distribution or copying of
 >> this email and any attachment is strictly prohibited. If you
 >> have received this email in error, please contact the sender
 >> and delete the message and any attachment from your system.
 >>
 >> Thank You.
 >>
 >> ##############################################################
 >> #######################
 >>
 >>
 >> --
 >> To unsubscribe from this list go to the following URL and read the
 >> instructions:  https://lists.samba.org/mailman/options/samba
 >>
 >
 >
 >--
 >To unsubscribe from this list go to the following URL and read the
 >instructions:  https://lists.samba.org/mailman/options/samba
--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba
Loading...