> Hi, this is my first message here. I need help, the reason is in the title.
> The version running is SAMBA_4.0.0ALPHA18_DEVELOPERBUILD
>
> It was running just fine until I had (for some reason) had to transfer all
> the system (ubuntu 11.10 server)
> to another clean hard drive. I used "rsync -rltgoHDv /olddriveroot
> /newdriveroot" to copy the files,
> and installed grub on the new disk.
>
> Now the problem is that samba4 works, domain users can log on and access
> files, but the permissions
> have been reset to some basic values (different from all the ones I had set
> before), and I can not
> change them at all from a windows7 box as I could before. When I apply the
> changes, it takes a while
> to process the files, then the "basic" permissions are set again (my changes
> lost).
>
> Here is my /usr/local/samba/etc/smb.conf :
>
>
> [global]
> interfaces = 127.0.0.1/8 192.168.1.0/24
> server role = domain controller
> workgroup = ACEIUBUNTU
> realm = ACEI2
> netbios name = ubuntuserveur
> passdb backend = samba4
> security = ADS
> domain master = yes
> local master = yes
> wins support = yes
> browseable = yes
> log file = /var/log/samba/smbd.log
> socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE
> SO_RCVBUF=4096 SO_SNDBUF=4096
>
> [netlogon]
> path = /usr/local/samba/var/locks/sysvol/acei2/scripts
> read only = no
>
> [sysvol]
> path = /usr/local/samba/var/locks/sysvol
> read only = no
>
> [profiles]
> path = /usr/local/samba/var/profiles
> read only = no
>
> [homes]
> path = /home/windows
> read only = no
>
> -------------------------------------------------------------------------
>
> The AD database is readable, since I can edit users and computers with the
> administration toolkit
> from windows7 box.
>
> /usr/local/samba/bin/testparm gives the following result :
>
> Load smb config files from /usr/local/samba/etc/smb.conf
> rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
> Processing section "[netlogon]"
> Processing section "[sysvol]"
> Processing section "[profiles]"
> Processing section "[homes]"
> Loaded services file OK.
> Server role: ROLE_DOMAIN_BDC
> Press enter to see a dump of your service definitions
>
> [global]
> workgroup = ACEIUBUNTU
> realm = ACEI2
> interfaces = 127.0.0.1/8, 192.168.1.0/24
> server role = domain controller
> security = ADS
> passdb backend = samba4
> log file = /var/log/samba/smbd.log
> socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE
> SO_RCVBUF=4096 SO_SNDBUF=4096
> domain master = Yes
> wins support = Yes
> idmap config * : backend = tdb
>
> [netlogon]
> path = /usr/local/samba/var/locks/sysvol/acei2/scripts
> read only = No
>
> [sysvol]
> path = /usr/local/samba/var/locks/sysvol
> read only = No
>
> [profiles]
> path = /usr/local/samba/var/profiles
> read only = No
>
> [homes]
> path = /home/windows
> read only = No
> ------------------------------------------------------------------------------------
>
> Also, user_xattr and acl are enabled on the ext4 file system, and the home
> folder on which I can
> not set permission has root:users ownership with rwx rights (which was
> working before).
>
> Since it is a recopy from a working system, maybe there is a problem with
> some file permission
> on the linux system, but I have searched a lot without finding any solution.
> Any help would be
> greatly appreciated.
>
> Regards,
> micmac
>
>
>
>
> --
> View this message in context:
http://samba.2283325.n4.nabble.com/Samba4-Problem-setting-folder-and-file-permissions-from-windows-box-tp4632038.html> Sent from the Samba - General mailing list archive at Nabble.com.
Locked
